Duux DECT baby monitor Specifications download pdf (Page 37)

recommended as they may reduce the device’s

operability.

- The device is not designed to run on

replaceable lithium batteries. WARNING:

improper use may create hazardous conditions.

Attention: RECOMMENDATIONS FOR

LITHIUM BATTERY USE

- Do not dismantle, open or tear lithium batteries.

- Do not short-circuit lithium battery terminals.

Do not store lithium batteries in an improper way

inside boxes and/or drawers in which terminals

can be short-circuited by each other or can be

short-circuited by conductive material.

- Do not remove lithium batteries from their

original packaging upon use.

- Do not expose lithium batteries to heat or fire.

Do not expose to direct sunlight.

- Do not expose lithium batteries to mechanical

shock. In case of accidental falls, always check

the status of the container and contacts before

proceeding with re-use. Do not use if the lithium

battery is damaged as a result of the fall.

- In the case of liquid leakage from the battery,

be careful to avoid contact with skin and eyes

with the liquid. If contact occurs, wash affected

areas with plenty of water and seek medical

advice.

- Do not use any charger not specifically

provided for use with the equipment.

- Observe the markings (+) and (-) on the Lithium

battery and on the product to ensure proper

insertion and use.

- Do not use a lithium battery different from

that supplied to power the device.

- Keep Lithium batteries away from the reach

of children.

- This device has been designed to prevent and

inhibit the incorrect insertion of the lithium

battery: always observe the relative polarity

markings on the product and on the Lithium

battery to ensure proper use.

- Do not use a model of battery that is different

than that stated in this instruction manual in the

device. The battery purchase reference code is

COD20256500100

- Recharge the lithium battery only under

application and only using the mains adapter

supplied(COD 20256500200). Do not recharge

the lithium battery using an external battery

charger. Follow the instructions in this manual to

recharge the lithium battery.

- Keep the battery and the battery contacts clean

and dry. In the event that the contacts become

dirty, clean the terminals with a soft, dry cloth. Do

not use abrasives, chemicals or solvents to clean

the battery and its contacts.

- Lithium batteries require charging prior to

use. Always refer to the instructions for correct

charging procedures.

- Do not keep charging the lithium battery when

not in use.

- Keep the instructions manual for future

reference.

- Always remove the Lithium battery from the

product when not in use.

- Dispose of properly according to the information

in this manual.

5.1 Installing Alkaline batteries not included in

the baby unit (primarily in transmitter mode)

Remove the Alkaline battery compartment

closing panel (14), placing your finger near the

top groove and and gently pulling the panel

outward (fig.1).

Insert two 1.5 V Alkaline AAA/L03 batteries,

respecting the proper insertion polarity as

indicated in the battery compartment.

Reposition the Alkaline battery compartment

closing panel (14), first inserting the lower panel

hooks in their battery compartment housing and

gently pushing the panel toward the product

(fig.2).

5.2 Replacing Alkaline batteries not included in

the baby unit (primarily in transmitter mode)

Remove the Alkaline battery compartment

closing panel (14), placing your finger near the

top groove and and gently pulling the panel

outward (fig.1).

Remove the two 1.5 V Alkaline AAA/L03

batteries and replace them with 2 similar 1.5V

AAA/LR03 batteries, taking care to respect the

proper insertion polarity as indicated in the

battery compartment. Reposition the Alkaline

battery compartment closing panel (14), first

inserting the lower panel hooks in their battery

compartment housing and gently pushing the

panel toward the product (fig.2).

5.3 Installing the lithium-ion battery supplied

with the parent unit (primarily in receiver

mode)

Upon purchase, the 3.7V 800mAh rechargeable

lithium-ion battery (18) in the parent unit is kept

separately in the product packaging.

Carefully remove the lithium-ion battery from

its packaging.

Remove the rechargeable battery compartment

closing panel (14), placing your finger near the

top groove and and gently pulling the panel

outward (fig.3).

Insert the lithium-ion battery (18), respecting

the proper insertion polarity as indicated in the

battery compartment.

Reposition the rechargeable battery

compartment closing panel (14), first inserting the

lower panel hooks in their battery compartment

housing and gently pushing the panel toward the

product (fig.4).

5.4 Replacing the lithium-ion battery supplied

with the parent unit (primarily in receiver

mode)

If the duration of the rechargeable lithium-ion

battery is reduced excessively, this means that it

has run out and therefore must be replaced (this

is to be considered normal because rechargeable

batteries run out over time).

Remove the rechargeable battery compartment

closing panel (14), placing your finger near the top

groove and and gently pulling the panel outward

(fig.3). Remove the run out rechargeable battery

(18) and replace with another rechargeable

battery that is identical to the 3.7V 800mAh

supplied with the product (code20256500100 o

be requested directly from Artsana S.p.A.) taking

care to place them with the correct insertion

polarity indicated on the battery compartment.

Reposition the rechargeable battery

compartment closing panel (14), first inserting the

lower panel hooks in their battery compartment

housing and gently pushing the panel toward the

product (fig.4).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 219 220

Comments to this Manuals

No comments

Duux DECT baby monitor Specifications Page 37

Comments to this Manuals

Related products and manuals for Baby video monitors Duux DECT baby monitor